How to Manually Move Axes

Find the "Hand Jog" button.

Press the "Hand Jog" button.

Select the desired movement increment: .1, .01, .001, .0001 (top numbers) per click on handle

Bottom numbers (.1,1.10,100) refer to travel speed (ipm) when jogged at a constant rate

Select the axis of movement: X, Y, Z. (Z will move the tool holder, X and Y move the platform.) by pressing an appropriate axis key on the left

If necessary, make sure the "Manual" Tab is selected. (If not, use the arrow keys to move the selection over.)

Press the "Write/Enter" button if needed to activate Manual mode.

Find the "Handle Jog."

Twist the "Handle Jog" as desired.

To jog at a constant rate, hold down the appropriate axis selection button next to the handle.

Avoid the JOG LOCK key!! as it causes axes to continue jogging after button is released.