-
-
Under the Build Preparation tab, click "New Scene" to select the correct build environment.
-
Select "B. Proc.: SLM 125 HL" in the Change Machine dialogue box and hit Ok.
-
-
-
Import the .STL files of the components to be printed with the Import Part command (File -> Load -> Import Part or Ctrl+L).
-
Part may be stacked or intersected at default importing positions. Check the Part List for unwanted duplicates and delete as necessary.
-
-
-
With a part selected, use the "Translate" or "Interactive Translate" commands to position parts on the build plate with respect to the XY coordinate system.
-
With a part selected, use the "Rotate" or "Interactive Rotate" commands to rotate parts on the build plate.
-
Parts must be raised 5mm from the build plate for sufficient support generation stand-off during subsequent part removal operations.
-
With a single part selected, use the Translate command and set the Absolute Z position to 5mm. X and Y position is maintained if a single part is selected and raised at a time.
-
-
-
With a single part (or set of identical parts) selected, use the "Generate Support" command to auto-generate support structures under your part.
-
Repeat this process until all parts are supported.
-
-
-
Select the "Configure Platform Default and Part Overrides" command on the SLM 125 HL tab to configure the parameters for printing.
-
Individual parts may be overwritten to use their own unique parameter set.
-
-
-
Select the "Build" command in the SLM 125 HL tab to initialize the .SLM file construction process.
-
Create a filename using the following format: XXXX__#A_#B_#C etc.
-
XXXX = Build number, consecutive from the previous
-
A, B, C = Part Name
-
# = Number of parts of the associated Part Name on the build plate
-
Select the "Save to directory" Submit Type and select an empty destination directory for the .SLM file to be placed in.
-
Click "Create Job" to begin the .SLM file construction process.
-
The SLM cloud system will build the .SLM file and upload it to the destination. This process can take anywhere between 1 - 15 minutes. No prompt is provided upon completion - the destination folder must be refreshed until the .SLM file is constructed.
-
